Description

• Keyless chuck
• Suitable for M18FPD & M18ONEPD
• This is a more solid spindle (9/16")
• Unique size to fit the M18FPD & M18ONEPD combi drills
• Procedure to remove old chuck:
• Open jaws of chuck
• Remove chuck screw
• On the FPD it is #40 TORX screw
• This is LH thread so turn clock wise to remove the centre screw
• This may require impact wrench and using a cut down Allen wrench
• Once screw is out put a cut down shaft of Allen key tightened into the chuck jaws and drive it off anti clockwise using an impact wrench