Burrs from ATA Garryson, PFERD and Dormer in head diameters from 3mm to 16mm, for shaping, deburring and blending welds with a die grinder or rotary tool. Choose double cut tungsten carbide burrs for smaller chips, a smoother finish and better control on most metals, or single cut for heavier work on hardened and stainless steels. Match the head shape to the job: cylinders for flat faces, balls for hollowing, trees and cones for edges and chamfers.
Cut style is the first decision. Double cut, also called cross cut or diamond cut, has two sets of flutes crossing each other, so it breaks the material into small chips that are easier to control and leave a cleaner surface. That makes it the usual choice for mild steel, cast iron, weld beads and general fabrication work, and the easier option if you are new to carbide burrs. Single cut has one spiral flute and suits harder metals such as hardened and stainless steel. On aluminium and other soft non-ferrous metals, a standard double cut can clog as chips weld into the flutes, so keep the burr moving, use light pressure and clear the head often.
Head shape decides the profile you can cut. Cylinder burrs work flat surfaces and right-angled corners, and cylinder end cut versions add teeth on the end face for working into a shoulder. Ball nosed cylinders blend radiused corners without leaving a step. Ball and oval heads hollow out and shape concave areas, while tree, pointed tree and ball nosed tree burrs reach into acute angles and contours. Cones, inverted cones and the 60 degree countersink are for chamfering, countersinking and back-deburring holes. For a mix of jobs, the Dormer 5 piece solid carbide burr set covers several common shapes in one case.
Size matters for both reach and speed. Head diameters on this page run from 3mm for fine detail and small bores up to 16mm for fast stock removal on larger faces, with overall lengths from 37mm to 175mm. The 175mm long reach cylinder gets into deep cavities and pipework that a standard length burr cannot reach. As a rule, larger diameter burrs need lower speeds and smaller ones need higher speeds, so always check the maximum RPM against your grinder and wear eye protection, as carbide chips leave the cutter hot and fast.
Product list

658B3700
ATA Tungsten Carbide Burr - Ball Nosed Cylinder
From £44.49 exc VAT From £53.39 inc VAT
658B1700-1
ATA Tungsten Carbide Burr - Cylinder - 12.7mm x 70mm
£46.58 exc VAT £55.90 inc VAT
658B6800
ATA Tungsten Carbide Burr - Pointed Tree
From £46.58 exc VAT From £55.90 inc VAT
658B9700
ATA Tungsten Carbide Burr - Ball Nosed Tree
£77.71 exc VAT £93.25 inc VAT
658B1402-D
ATA Tungsten Carbide Double Cut Burr - Cylinder End Cut
From £29.93 exc VAT From £35.92 inc VAT
658B1700-1D
ATA Tungsten Carbide Double Cut Burr - Cylinder - 12.7mm x 70mm
£24.95 exc VAT £29.94 inc VAT
658B2400-D
ATA Tungsten Double Cut Carbide Burr - Cone
From £47.47 exc VAT From £56.96 inc VAT
658B3600-D
ATA Tungsten Carbide Double Cut Burr - Ball Nosed Cylinder - 9.6mm x 64mm
£34.50 exc VAT £41.40 inc VAT
658B7700
ATA Tungsten Carbide Burr - Ball
£73.13 exc VAT £87.76 inc VAT
658B9700-D
ATA Tungsten Carbide Double Cut Burr - Ball Nosed Tree - 12.7mm
£77.71 exc VAT £93.25 inc VAT
658B88001SET
Dormer Solid Carbide Burr Set - 5 Piece
£82.05 exc VAT £98.46 inc VAT
658B1700-1XL
ATA Tungsten Carbide Burr - Cylinder - 12.7 x 175mm
£107.84 exc VAT £129.41 inc VAT
