Product information
- Two pack epoxy adhesion and stabilising primer
- Used as a primer for cladding stripped to the bondcoat or galvanised substrate; a patch primer for bare steel areas; an adhesion coat over existing cladding coatings, prior to the application fo ViterClad PV or Viterclad 50
- Ideal for most plastics, fibreglass, stainless steel or aluminium
- Available in RAL Classic, BS 381C and BS 4800 colours (except for luminescent, pearlescent and metallic finish colours)
- Suitable to apply by brush, roller or spray - care should be taken to ensure the high build nature of the paint is maintained
- For thinning and cleaning equipment use 1031 Thinner
- For more information see attached Data Sheet
Colours are for guidance only and a colour swatch of the appropriate RAL/BS code should be obtained to confirm colour choice. Incorrectly chosen colours can not be returned or altered
Coverage Calculator
Or
litres required *
* All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
Reviews
There are currently no reviews of this product, why not be the first to write one?
